Daily Maintenance Tips for Air-Source Heat Pump Dryer

① Before starting the dryer daily, check that the power cord is tight and the voltage is stable.

② Clean the return air filter daily and remove lint from the dust box to ensure smooth ventilation and optimal drying performance.

③ Within 30 minutes of starting the dryer, check the operating pressures (high, medium, and low) to ensure they are within the normal range.

Monthly Maintenance for Heat Pump Dryers

① Open the rear cover and use a low-power delamination nozzle to clean all internal components.

② Thoroughly clean the dryer's fin heat exchanger to ensure optimal heat transfer.

③ Lubricate moving parts, such as fan bearings, with appropriate lubrication to reduce friction.

④ Check the belt tension and adjust the pulleys appropriately to ensure optimal working condition.

⑤ Reinforce any parts prone to loosening or falling due to vibration, including electrical wiring, door arms, and pipe connections.

Annual Maintenance of Air-Source Heat Pump Dryers

① Check the base mounting bolts for looseness and tighten them.

② Check the tightness of the support springs and adjust them accordingly.

③ Check the grounding of the equipment and ensure it is secure.

④ Check the sensitivity of the computer board controls, impeller, and heat exchanger.